Elite Series

Our top of the line system features modular flexibility with the essence of a custom fit. Engineered into the design are numerous access panels, a curved bumper base for durability, a passive ventilation system, a wire management system, single level construction and total modularity.

System Components

• CSW - CONSOLE SUPPORTS AND WIRE TROUGHS - Each console support has a field relocatable, hidden 14 inch rack, covered with a removable Plexiglas panel. The panel protects the rack mounted equipment from the operator's feet while allowing a view to the panel lights. Drawers can be added to the supports. The center counter and wire trough can be expanded to accommodate larger consoles.

• CTR - CORNER TOWER RACK - Sitting on top of the CSW and the CTR positions equipment such as cart machines at a 20 degree angle to the operator. Standard rack opening is 14 inches. The rack height can be expanded as much as needed.

• TSB - TOWER STORAGE BASE - The TSB raises up the CTR to provide storage for 10 hot carts or 15 CD's. This also allows the CTR to cantilever over the control console thereby saving the addition of width to center when using an 18 input console.

• SRR - SLOPED RACK RETURN - This return comes standard with a 21 inch rack. This space can be easily converted to media storage or pencil and file drawers.

• STR - SINGLE TURNTABLE RETURN - Featuring an easy to see over bifold dust cover this return houses turntables, reel to reel machines and CD players. It comes standard with a 10 1/2 inch rack. An optional sand loaded isolator base can be ordered.

• STR - SINGLE TURNTABLE RETURN - Featuring an easy to see over bifold dust cover this return houses turntables, reel to reel machines and CD players. It comes standard with a 10 1/2 inch rack. An optional sand loaded isolator base can be ordered. ( See this option pictured below )
  
  
• CTO - COVERED TURNTABLE OPTION - Featuring an easy to see over bifold dust cover this return houses turntables, reel to reel machines and CD players. It comes standard with a 101/2 inch rack. An optional sand loaded isolator base can be ordered.

• WSR - WORK SURFACE RETURN - Used as a work surface for computers, keyboards and guest positions. This module can be built to custom widths. there is a built in wire pass and it can be ordered with a pencil drawer.

• RCP - RETURN COMPLETION PANEL - Used to cover the unfinished end of the return. One panel needed for each return.

• GPS - GUEST POSITION SHELF - Used to provide multiple talent positions. This shelf can be mounted anywhere and can be free standing.

• SCS - SLIDING COPY STAND - This is a copy holder that features a stick on note surface.

• RRO - RAISED RACK OVERBRIDGE - This versatile module use is to provide rack space above the return modules or above transport mounted reel to reel machines. Rack heights and the number of rack bays vary according to your exact needs.

• TSR - TOP SLOPED RACK - Used mainly to house reel to reel machines. This rack can be used for patch bays and any other gear that needs to kept at a low profile on the countertop.

• GTR - GUEST TURRET RACK - This panel rack attaches to the top of the Guest Position Shelf. Timers, cough buttons and headphone controls can be mounted in the panel face.

• RPC - RACK PANEL COVER - These panels cover empty rack space and should be ordered after equipment installation.

Accessory Option CTO - COVERED TURNTABLE OPTION - Featuring an easy to see over bifold dust cover this return houses turntables, reel to reel machines and CD players. It comes standard with a 101/2 inch rack. An optional sand loaded isolator base can be ordered. Available for the Premier and Elite Series.

ALL DIMENSIONS GIVEN ARE STANDARD. CUSTOMIZING OF ANY COMPONENT IS AVAILABLE.